JHA Board

JHA - Fireproofing Board Installation | Reusable Template

JOB HAZARD ANALYSIS

Safety & Risk Management Document

🧱 FIREPROOFING BOARD INSTALLATION Rigid Board Systems

🏢 Contractor / Company Name

📍 Project / Site Name

📅 JHA Date Prepared

👷 Project Manager / Superintendent

👤 Prepared By (Name)

📅 Date

🛡 Safety Manager / Officer

📅 Date

🏗 Customer / Client Rep

📅 Date

Job Step / Task	⚠️ Potential Hazards	🛡 Prevention & Controls
1. Material Delivery & Storage (Fireproofing Boards)	Heavy boards (40-80 lbs each) Sharp edges / corners Stack collapse / unstable piles Slip/trip from scattered materials	Team lifting or mechanical aid Cut-resistant gloves & long sleeves Stack flat, interlock, limit height Keep walkways clear; immediate cleanup
2. Cutting / Shaping Boards (Saw, Knife, Router)	Respirable dust (fiberglass/silica) Lacerations from blades Eye injury from flying particles Noise from power tools	HEPA vacuum attachment or dust extraction N100 respirator + cut-resistant gloves Safety glasses + face shield Hearing protection (NRR 25+)
3. Working at Height (Scaffold, Lift, Ladder)	Fall from elevation (6 ft+) Scaffold instability Dropped boards / tools Overhead electrical hazards	100% tie-off harness + lanyard Competent scaffold inspection Tool lanyards & toe boards Maintain 10 ft clearance from power lines
4. Board Installation (Mechanical Fastening)	Struck-by hammer / power driver Hand fatigue / ergonomic strain Pinch points between boards Working near energized equipment	Use pneumatic tools where feasible Take micro-breaks, use ergonomic tools Keep hands clear of pinch areas LOTO / de-energize nearby equipment
5. Adjacent Trades / Hot Work Coordination	Fire from welding / sparks Fume exposure (isocyanates) Confusion / communication gaps	Fire watch & extinguisher nearby Coordinate hot work permits Daily safety huddle & signage
6. Cleanup & Waste Disposal	Dust re-aerosolization Sharp scrap edges / punctures Heavy debris removal	HEPA vacuum (no dry sweeping) Puncture-resistant gloves & long sleeves Use debris chute or team lifting

🛡 REQUIRED PERSONAL PROTECTIVE EQUIPMENT (Board Installation)

N100 / P100 Respirator (dust) Cut-Resistant Gloves (Level A4+) Safety Glasses + Face Shield Hearing Protection (NRR 30) Hard Hat (ANSI Z89.1) Steel Toe Boots (puncture-resistant) Fall Arrest Harness + Lanyard High-Vis Vest (if near equipment) Long Sleeve Shirt / Arm Guards

📝 Additional PPE / Remarks:

🚨 EMERGENCY RESPONSE & FIRST AID (Board Installation)

🩸 Severe laceration (cut from board / blade):

👁 Dust / particle in eye:

🌧 Inhalation of fiberglass / silica dust:

🤹 Fall from height / major trauma:

🦮 Crush injury / falling board:

📞 On-site emergency contact / plan:

🔨 Board Installer / Crew Lead Signature

🛡 Safety Coordinator / Reviewing Authority

🏢 Company Safety Director (optional)

✓ Fully reusable Fireproofing Board JHA — fill once, print, then clear and reuse unlimited times. Buttons use event delegation and will never break regardless of how many times you use them.

JOB HAZARD ANALYSIS fire board

JOB HAZARD ANALYSiS fire board

🛡 REQUIRED PERSONAL PROTECTIVE EQUIPMENT (Board Installation)

🚨 EMERGENCY RESPONSE & FIRST AID (Board Installation)